GE IS200VCMIH2BEE Master Communication Controller Board
The GE IS200VCMIH2BEE, also cataloged as the IS200VCMIH2BEE master communication controller board, serves as the primary VCMI module used to execute fiber‑optic IONet communication, SIFT‑based TMR data voting, and rack‑level packet distribution across Mark VI Speedtronic platforms.
Hardware Specifications
Parameter
Specification
Model
IS200VCMIH2BEE
Brand
General Electric
Origin
United States
Weight
Not specified
Dimensions
Not specified
Operating Temp
Not specified
Power Consumption
Not specified
Series
Mark VI Speedtronic
Product Type
Master Communication Controller Board
IONet Ports
Three fiber‑optic ports (TMR)
Serial Port
One male serial port
Board Format
Double‑sided PCB
Indicators
Four LED groups (3, 6, 8, 3 LEDs)
Functional Description
UDH master communication controller
Backplane Bus Communication Velocity Licenses
As part of GE’s Mark VI control architecture, the IS200VCMIH2BEE governs deterministic communication cycles across the Unit Data Highway. The board broadcasts data packets simultaneously to all remote racks, where downstream VCMI modules extract their assigned data. TMR operation uses three IONet channels with SIFT voting to maintain synchronized communication paths. Firmware flash compatibility resides entirely in the controller; the VCMI board contains no programmable flash and performs passive communication routing. I/O density scaling is achieved through fixed fiber‑optic IONet timing and stable backplane arbitration.
Frequently Asked Questions
Q: Are earlier revisions of the IS200VCMIH2BEE backwards‑compatible? A: Yes. The first two functional revisions are backwards‑compatible with this version.
Q: Why is the VCMI acronym used? A: It serves as a concise functional label for the master communication controller board.
Q: Can the board be replaced under power? A: No. The controller rack must be de‑energized to avoid undefined communication states.
Field Installation Guidelines
Verify cabinet power is fully isolated before removing or inserting the board.
Use both hands to withdraw the module evenly to avoid stressing backplane connectors.
Ensure all three IONet fiber‑optic cables are fully seated in TMR systems.
Maintain separation between fiber‑optic routing and high‑energy conductors to reduce noise coupling.
Confirm proper seating of backplane connectors and inspect LED indicators during commissioning.
Follow GE installation manuals for grounding, rack alignment, and connector torque requirements.
