GE IS200REBFH1ABA Exciter Regulator Feedback Board
The GE IS200REBFH1ABA, also cataloged as the IS200REBFH1ABA feedback board, operates as a dedicated interface module for field‑voltage and field‑current feedback processing within EX2100 excitation control networks.
Hardware Specifications
Parameter
Specification
Model
IS200REBFH1ABA
Brand
General Electric
Origin
USA
Weight
Not specified
Dimensions
Not specified
Operating Temp
Not specified
Power Consumption
Not specified
Signal Types
Field voltage and field current feedback
Interface
Conditioning and isolation for excitation feedback loops
Mounting
Single‑slot PCB for EX2100 racks
Series
EX2100
Product Type
PCB Circuit Board
Backplane Bus Communication Velocity Licenses
Within EX2100 excitation architectures, the board aligns with GE backplane bus communication velocity licenses governing deterministic feedback‑signal propagation. Field‑current and field‑voltage conditioning follow fixed‑cycle timing windows required for synchronous generator‑field regulation. Firmware flash compatibility ensures controller updates do not disturb established scaling tables or isolation‑barrier behavior. I/O density scaling remains stable across simplex and redundant excitation configurations.
Frequently Asked Questions
Q: Can the IS200REBFH1ABA be replaced while the excitation system is energized? A: The board is not designed for hot‑swap. Replacement should occur only when the excitation segment is de‑energized to avoid transient loading on the rack.
Q: Does the board provide isolation for high‑energy field circuits? A: Yes. The board conditions and isolates field‑voltage and field‑current feedback signals before presenting them to the control electronics.
Q: Is firmware compatibility required when installing a replacement board? A: The board generally maintains compatibility across EX2100 controllers, but verification against the specific controller firmware is recommended to avoid mismatched scaling.
Field Installation Guidelines
Maintain shield continuity on field‑current and field‑voltage wiring to reduce induced noise from generator‑field conductors.
Verify correct rack slot placement before energizing the excitation system.
Ensure connectors are fully seated to maintain stable feedback‑signal timing.
Route feedback wiring separately from fan‑starter or high‑frequency gate‑drive conductors.
Inspect PCB surfaces for contamination or coating damage prior to installation.
