The General Electric IC670CHS002E is a high-reliability I/O terminal block designed for the Field Control series. This component serves as a robust interface for field wiring, supporting the integration of I/O modules into industrial control systems. It is engineered to facilitate efficient signal distribution while maintaining the integrity of the connection architecture.
Features
Designed for integration with GE Field Control series I/O modules.
Supports a capacity of up to 2 modules per terminal block.
Equipped with 37 terminals for versatile field wiring configurations.
Rated for a maximum terminal current of 10 Amperes.
Features hot-swap compatibility to minimize system downtime during maintenance or module replacement.
Compatible with I/O modules featuring a catalog number suffix of J or higher.
Technical Specifications
Model Number
IC670CHS002E
Spare Part Reference
IC670CHS002
Component Type
I/O Terminal Block
Terminal Count
37
Max Terminal Current
10 A
Module Capacity
2 modules
Wire Gauge Compatibility
1 x AWG #14 (2.1 mm2) or 2 x AWG #18 to #22 (0.86 mm2 to 0.35 mm2)
Installation Guidelines
Ensure the control system is powered down before installing or removing the terminal block or associated I/O modules.
Verify that the I/O module being installed carries a catalog suffix of J or higher to ensure full compatibility with this block.
Secure the terminal block firmly to the mounting surface or rail system as specified by the Field Control hardware manual.
When wiring, ensure that wires are stripped to the correct length to prevent short circuits or loose connections.
Maintain proper cable management to avoid mechanical strain on the 37-pin terminal interface.
Adhere to standard ESD (Electrostatic Discharge) handling procedures when performing maintenance on electronic components.
FAQ
Is the IC670CHS002E compatible with all Field Control modules?
This terminal block is specifically compatible with modules that have a catalog number suffix of J or higher. Please verify your module revision before installation.
Does this terminal block support hot-swapping?
Yes, the IC670CHS002E is designed for hot-swap functionality, allowing for module replacement without requiring a full system shutdown, provided the surrounding system architecture supports this feature.
What wire sizes are recommended for the terminals?
The block accepts one wire of AWG #14 (2.1 mm2) or two wires ranging from AWG #18 (0.86 mm2) to AWG #22 (0.35 mm2).
