Configured for fuel pressure management and regulation in Speedtronic Mark V control systems, the General Electric DS200XDSAG1A (DS200XDSAG1A) PC Board provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
DS200: Identifies the product as a Mark V standard footprint component compatible with system backplanes.
XDSA: Designates the specific circuit architecture as a fuel pressure management control board.
G1: Indicates hardware group revision 1.
A: Denotes the primary manufacturing artwork revision level.
Hardware Specifications
Parameter
Specification
Model
DS200XDSAG1A
Brand
General Electric
Origin
USA
Weight
6.80 kg
Dimensions
300 mm x 250 mm x 40 mm
Operating Temp
-20 deg C to +65 deg C
Power Consumption
12.0 W typical from internal rack rails
Profinet and Backplane Communication Velocity
Backplane bus communication velocity licenses and deterministic network protocols ensure high-speed data exchange with core processor modules.
I/O density scaling allows seamless integration of fuel pressure feedback loops and multi-channel control signals across Mark V racks.
Firmware flash compatibility supports updates and configuration management via system engineering tools.
Frequently Asked Questions
Q: Does the DS200XDSAG1A board support online hot-swapping within an active Mark V rack?
A: No, power must be completely isolated from the specific rack slot prior to removing or inserting the control board to prevent electrical arc damage to backplane pins.
Q: How are calibration parameters retained on this fuel pressure management board?
A: Operational parameters and configuration data are stored on non-volatile memory chips mounted directly on the board assembly.
Field Installation Guidelines
Mount the board securely within the designated Mark V cabinet enclosure slot using the integrated fastening hardware and edge guides.
Ensure all backplane edge connectors are clean, aligned, and fully seated to prevent intermittent communication faults.
Verify proper shielding and grounding of incoming pressure transducer signal cables to minimize electrical noise across the control loops.
