• بيت
  • GE T35A00HCHF8CH6UM8CP6CU8AWXX Multilin Universal Relay

أُوكَازيُون

أُوكَازيُون

GE T35A00HCHF8CH6UM8CP6CU8AWXX Multilin Universal Relay

في الأوراق المالية!
  • Part Number: T35A00HCHF8CH6UM8CP6CU8AWXX
  • Brand: General Electric
  • Type: Multilin Universal Relay
  • Dimensions: 4x18.5x12.7cm
  • Country of Origin: USA
  • Barcode: 8537101190

Additional Specifications

Color / Pattern
  • Black
  • Gray
Power Source
  • DC-powered
Communication Protocols
  • Ethernet
Controller Design
  • Modular
Tags: GE , GE Fanuc , GE Multilin UR Series , Multilin Universal Relay

وصف المنتج

The GE T35A00HCHF8CH6UM8CP6CU8AWXX, also cataloged as the T35 Transformer Protection System, operates as a dedicated hardware component for multi-winding transformer management, phase differential protection, and substation bus monitoring within Multilin Universal Relay (UR) platforms.

Hardware Specifications

Parameter Specification
Model T35A00HCHF8CH6UM8CP6CU8AWXX
Brand GE (General Electric / Multilin)
Series Universal Relay (UR) Series / T35
Origin Canada (CA)
Weight Approx. 4.1 kg (9.0 lbs) net mass
Dimensions 4U standard 19" rack-mount horizontal chassis assembly
Operating Temp -40 to +60 deg C (-40 to +140 deg F) continuous rating
Power Consumption 15 VA typical / Max 30 W based on module loading configurations
Nominal Logic Inputs 24 to 250 VDC external wetting options
Relay Contact Output Form A / Form C electromechanical output blocks
AC Current Inputs 1 A / 5 A dual-rated phase and ground CT inputs
AC Voltage Inputs 0 to 300 V nominal VT sensing paths
Network Interfacing High-speed Ethernet module with redundant architecture options
Time Synchronization Redundant SNTP and IEEE 1588 IRIG-B hardware decoding

GE Industrial Control and Drive Coordination

  • Backplane Bus Communication Velocity Licences: The T35 architecture utilizes a multi-processor parallel backplane that binds real-time analog-to-digital DSP boards directly with the central computing matrix. It processes AC waveforms, executes math algorithms, and asserts protective trip commands across internal copper lanes within sub-millisecond calculation intervals.
  • Profinet / EtherNet/IP Deterministic Networks: Outfitted with specialized network processing cards, the unit handles native communication streams including DNP 3.0, Modbus TCP/IP, and IEC 61850. The processing layer supports Parallel Redundancy Protocol (PRP) structures to isolate and duplicate communication frames, minimizing packet loss during network sector degradation.

Frequently Asked Questions

Q: How does the internal 2nd harmonic inhibit mechanism preserve stability during transformer energization?

A: The digital signal processor runs discrete Fourier transforms (DFT) to isolate the second-harmonic current vectors from the fundamental operating frequency. If the 2nd harmonic ratio exceeds the set percentage threshold (typically programmed around 15% to 20%), the relay determines that an inrush phenomenon is taking place and suppresses the instantaneous differential element (87T) to eliminate false trips.

Q: Can an individual I/O or CT/VT module block be hot-swapped while the main chassis is powered up?

A: No. The parallel backplane pins and multi-point terminal block sockets lack isolated current-limiting gates for live card insertion. Pulling or sliding hardware modules into an active chassis can cause backplane data parity exceptions, interrupt critical trip sensing paths, or damage delicate solid-state elements via inductive voltage spikes.

عرض التفاصيل الكاملة
المنتجات التي تمت مشاهدتها مؤخرًا