GE IC695ACC413 Energy Pack Module

Configured for power continuity in GE PACSystems RX3i platforms, the GE IC695ACC413 (IC695ACC413 Energy Pack Module) provides direct electrical execution of energy storage and short-term voltage regulation.

Hardware Specifications

Industrial Control and Network Characteristics

• Backplane Bus Communication Velocity: The module communicates with the CPU and power supply backplane to monitor energy levels and status, ensuring synchronized response to power loss events. It adheres to standard RX3i deterministic bus timing for rapid handover during input power transitions.
• Firmware Flash Compatibility: The unit supports firmware updates via the PACSystems controller backplane, allowing for field-level maintenance and compatibility patches to be applied without physical module modification.
• I/O Density Scaling: The IC695ACC413 is designed to provide sufficient energy hold-up time to support the power requirements of high-density I/O configurations during the critical transition phase of a power outage.

Frequently Asked Questions

Q: Does the IC695ACC413 support hot-swapping while the backplane is energized?

A: No. The module is not designed for hot-swapping. The RX3i system must be powered down prior to module installation or removal to prevent potential damage to the backplane communication pins.

Q: How does the ultracapacitor technology affect maintenance cycles?

A: The use of ultracapacitors eliminates the chemical degradation associated with traditional battery backup units, significantly extending the service life and removing the requirement for periodic battery replacement.

Field Installation Guidelines

• Mounting Stability: Secure the module into the designated RX3i rack slot. Ensure the module is fully seated to maintain reliable backplane contact for energy status signaling and charging current flow.
• Grounding: Bond the rack chassis to a low-impedance protective earth (PE) bus. Proper grounding is required for the internal circuitry to effectively manage discharge transients and maintain the integrity of the energy storage monitoring signals.
• Thermal Considerations: Ensure adequate airflow around the module to prevent localized heating during the rapid charging cycles. Adhere to the recommended spacing specifications for the RX3i rack environment.