The Emerson Ovation 1P00162G01, also cataloged as the 1P00162G01 control card module, operates as a dedicated hardware component for executing control logic and managing communication within Ovation Distributed Control System (DCS) architectures.
Hardware Specifications
Parameter
Specification
Model
1P00162G01
Brand
Emerson
Origin
USA
Weight
Not specified
Dimensions
Not specified
Operating Temp
Not specified
Power Consumption
Not specified
Core Performance Indicators
Control card module for Ovation DCS; executes process logic; interfaces with system backplane; supports communication with controllers and I/O assemblies
4-20 mA HART Loop Protocol
Within Emerson Ovation systems, the 1P00162G01 integrates with:
4-20 mA HART loop protocol for analog signal processing.
FOUNDATION Fieldbus / Profibus PA connectivity through system interfaces.
Channel-to-channel isolation ensuring independent signal paths.
Cold junction compensation (CJC) applied in associated input/output modules.
Frequently Asked Questions (FAQ)
Q: Can the 1P00162G01 card be hot-swapped? A: No. The card must be replaced with the system powered down to prevent bus errors or unintended process interruptions.
Q: What Ovation systems support this card? A: It is designed for Emerson Ovation DCS platforms and integrates with standard I/O chassis assemblies.
Q: How does the card interface with controllers? A: It connects via the system backplane, enabling communication with controllers and I/O modules for process execution.
Field Installation Guidelines
Mount card securely in designated backplane slots per Emerson installation standards.
Verify connector seating before energizing to ensure stable communication.
Maintain separation between signal wiring and high-voltage circuits.
Ground chassis to plant earth to minimize EMI.
Perform diagnostic checks after installation to confirm card recognition by the system.
Replace only during scheduled maintenance to preserve system integrity.
