The Bently Nevada 330104‑00‑15‑10‑02‑05 is a 3300 XL‑series 8 mm eddy‑current proximity probe designed for shaft vibration, radial position, and rotor‑dynamic monitoring. This configuration includes a long 150 mm case, armored construction, 1.0 m cable, ClickLoc connector, and full hazardous‑area approvals.
02 — Miniature coaxial ClickLoc connector, standard cable
05 — CSA / ATEX / IECEx approvals
Hardware Specifications
Parameter
Specification
Model
330104‑00‑15‑10‑02‑05
Brand
Bently Nevada
Origin
Made in U.S.A
Thread Type
M10 × 1 (metric)
Unthreaded Length
0 mm
Overall Case Length
150 mm
Cable Length
1.0 m
Connector Type
Miniature coaxial ClickLoc
Agency Approvals
CSA, ATEX, IECEx
Probe Tip Material
Polyphenylene sulfide (PPS)
Probe Case Material
AISI 303 / 304 stainless steel
Weight
0.323 kg (typical)
Shipping Weight
1.5 kg
Functional Characteristics
The probe follows the standard 3300 XL eddy‑current scaling curve, ensuring compatibility with all 3300 XL proximitor modules. The extended 150 mm case length is used in deep‑reach installations such as bearing housings, turbine casings, or API‑compliant measurement points.
The armored cable and ClickLoc connector provide:
High mechanical durability
Stable impedance over full cable length
Secure connector retention
EMI‑resistant coaxial shielding
The CSA / ATEX / IECEx approvals allow deployment in hazardous industrial zones.
Installation Notes
Use an M10 × 1 threaded bore with clean, burr‑free surfaces.
Maintain perpendicular alignment to the shaft for linear displacement response.
Avoid sharp cable bends to preserve coaxial impedance.
Terminate shielding at the proximitor end only.
Verify gap voltage after installation to confirm correct standoff distance.
