Configured for dynamic vibration and eccentricity measurement in Allen-Bradley networks, the Allen-Bradley 1440-VST02-01RA (1440-VST02-01RA Dynamic Measurement Module) provides direct physical/electrical execution.
Hardware Specifications
Parameter
Specification
Model
1440-VST02-01RA
Brand
Allen-Bradley
Origin
USA
Weight
0.49 lbs (0.22 kg)
Dimensions
Standard Dynamix 1440 Module Footprint
Operating Temp
-20 to 65 deg C
Power Consumption
24 VDC Supply Voltage
Channel Count
2 Channels
Measurement Type
Dynamic Eccentricity Measurement
Hardware Part Number
PN-153670
Module Type
PLC System Module
Backplane Bus Communication Velocity & I/O Density Scaling
The 1440-VST02-01RA card maintains continuous backplane bus communication velocity across Dynamix 1440 monitoring racks while processing dual-channel dynamic signals. High I/O density scaling is maintained by digitizing high-frequency transducer inputs directly at the local hardware interface before transmitting calculated metrics back to the main controller. Firmware flash compatibility ensures synchronized sampling timing and low-latency packet updates across EtherNet/IP deterministic networks.
Frequently Asked Questions
Q: What power supply voltage is required to operate the 1440-VST02-01RA module?
A: The module operates on a nominal supply voltage of 24 VDC.
Q: How many dynamic measurement channels are provided on the 1440-VST02-01RA card?
A: The card features 2 dedicated channels designed specifically for dynamic eccentricity signal acquisition.
Field Installation Guidelines
Align the 1440-VST02-01RA module with the designated slot guide rails in the Dynamix base assembly and press firmly until the locking tab engages.
Connect 24 VDC primary power cabling to the module terminals, ensuring correct polarity prior to system power-up.
Route sensor signal wiring using twisted shielded pairs to prevent external electro-magnetic interference from distorting dynamic measurement signals.
Ensure terminal block field wiring is properly strain-relieved and grounded at the enclosure entrance point.
