• بيت
  • 330102-00-48-05-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe

أُوكَازيُون
  • Bently Nevada 330102-00-50-10-01-00
  • Bently Nevada 330102-00-50-10-01-00
  • Bently Nevada 330102-00-50-10-01-00

أُوكَازيُون

330102-00-48-05-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe

في الأوراق المالية!
  • Part Number: 330102-00-48-05-02-05
  • Brand: Bently Nevada
  • Type: Proximity Probes
  • Dimensions: 2x1.5x58cm
  • Country of Origin: USA
  • Barcode: 8537101190

Additional Specifications

Color / Pattern
  • Blue
Tags: 3300 Proximity Transducer System , Proximity Probes , TSI

وصف المنتج

Bently Nevada 330102-00-48-05-02-05 3300 XL 8 mm Proximity Probe

The Bently Nevada 330102‑00‑48‑05‑02‑05, part of the 3300 XL 8 mm Proximity Probe family, is designed for non‑contact vibration and position monitoring in industrial rotating machinery. This armored probe variant provides enhanced durability and hazardous‑area approvals for demanding environments.

Suffix Breakdown & Model Matrix

  • 330102 — 3300 XL 8 mm proximity probe, 3/8‑24 UNF thread, stainless steel armor
  • 00 — Unthreaded length option (0 mm)
  • 48 — Case length = 4.8 in (suffix “48” represents 4.8 inches in 0.5‑inch increment scale)
  • 05 — Cable length = 0.5 m (1.6 ft integral cable)
  • 02 — Connector option = Miniature coaxial ClickLoc connector with protector, molded to cable
  • 05 — Agency approvals = CSA, ATEX, IECEx hazardous‑area certifications

Hardware Specifications

Parameter Specification
Model 330102‑00‑48‑05‑02‑05
Brand Bently Nevada
Product Type 3300 XL 8 mm Proximity Probe
Tip Diameter 8 mm (0.31 in)
Case Length 4.8 in
Cable Length 0.5 m (1.6 ft)
Connector Type Miniature coaxial ClickLoc with protector, molded
Agency Approval CSA, ATEX, IECEx
Linear Range 2 mm (80 mils), approx. 0.25 mm to 2.3 mm gap
Output Sensitivity 7.87 V/mm (200 mV/mil)
Operating Temperature –35 °C to +177 °C (–31 °F to +351 °F)
Materials PPS probe tip, AISI 303/304 stainless steel case

Functional Description

This probe uses eddy‑current transducer technology to deliver a proportional voltage output relative to shaft displacement. The armored design and FluidLoc cable protection ensure resilience against mechanical stress and fluid ingress. Hazardous‑area approvals (CSA, ATEX, IECEx) make it suitable for installation in explosive or high‑risk industrial zones.

Frequently Asked Questions

Q: Can the 330102‑00‑48‑05‑02‑05 be hot‑swapped? A: No. Probes must be disconnected only when the system is de‑energized to preserve calibration integrity.

Q: How does the armored design improve reliability? A: Stainless steel armor protects the cable from mechanical damage and harsh environmental exposure.

Q: What applications are typical? A: Radial vibration, axial thrust position, and speed/phase reference measurements on turbomachinery in hazardous areas.

Field Installation Guidelines

  • Do not cut or modify the armored probe cable; factory termination preserves calibration.
  • Maintain proper bend radius to avoid altering coaxial geometry.
  • Route cables away from high‑frequency switching conductors to reduce induced noise.
  • Ensure ClickLoc connector is fully seated before energizing the system.
  • Confirm installation practices comply with CSA, ATEX, and IECEx hazardous‑area standards.
عرض التفاصيل الكاملة
المنتجات التي تمت مشاهدتها مؤخرًا