- Home
- KS1-10*B | Yokogawa | Signal Cable
Sale
KS1-10*B | Yokogawa | Signal Cable
No reviews
In stock!
- Part Number: KS1-10*B
- Brand: Yokogawa
- Type: Signal Cable
- Dimensions: 3.3x10.7x13cm
- Country of Origin: Japan
- Barcode: 8537101190
Share
Additional Specifications
| Color / Pattern |
|
| Power Source |
|
| Communication Protocols |
|
| Controller Design |
|
Product Description
Description
The Yokogawa KS1-10*B is a shielded signal cable used for interconnecting subsystem terminal boards and I/O modules within CENTUM VP and ProSafe‑RS control systems. The model supports stable mixed‑signal transmission across distributed control panels.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | KS1-10*B |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | Standard signal‑grade cable; no numeric value specified |
| Shipping Weight | Typical Yokogawa cable packaging; no numeric value specified |
| Cable Length | “10” indicates 10‑meter class (exact length depends on suffix \*B variant) |
| Connector Type | Yokogawa standard signal‑cable connector (model‑dependent) |
| Cable Type | Shielded multi‑signal cable |
| Signal Type | Mixed analog/digital signal transmission |
| Construction | Industrial shielded cable with fixed‑pin mapping |
| Impedance | Controlled impedance for stable long‑distance signal routing |
| Environmental Behavior | Non‑condensing humidity operation |
| Application | Terminal board and subsystem interconnection |
| Product Type | Signal Cables |
Functional Description
The KS1‑10\B signal cable provides shielded multi‑signal routing between Yokogawa subsystem components. Its construction supports mixed analog and digital signal transmission while maintaining stable impedance and low‑noise characteristics. The “10” designation identifies the cable as a 10‑meter class model, suitable for medium‑distance cabinet‑to‑cabinet wiring. The \B suffix identifies connector or shielding variations within the KS1 cable family. Shielding ensures channel‑to‑channel isolation and prevents interference when used in Yokogawa DCS wiring environments.
Frequently Asked Questions
Q: What does the “10” in KS1‑10\B represent?* It indicates the cable belongs to the 10‑meter length class.
Q: What does the \B suffix mean?* It identifies connector or shielding variations within the KS1 cable family.
Q: Can KS1‑10\B be used for mixed analog/digital signals?* Yes. The cable is designed for stable mixed‑signal routing.
Q: Is the cable hot‑swappable? No. Signal cables must be connected or removed only when associated I/O modules are powered down.
Field Installation Guidelines
- Maintain shield bonding at a single grounding point to avoid ground‑loop formation.
- Route the cable away from high‑voltage or high‑current conductors to prevent induced noise.
- Ensure connectors are fully seated and latched before powering the system.
- Apply strain relief at both ends to prevent connector fatigue during cabinet vibration.
- Avoid tight bending radii to maintain internal conductor integrity over the cable length.
Have a Question?
