Configured for precise signal acquisition in Experion Process Knowledge System platforms, the Honeywell TC-IXR061 (TC-IXR061 Analog Input Module) provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
TC-IXR061: Base module hardware identifier for the Experion C200/C300 series 6-channel high-resolution analog/thermocouple input module, equipped with a 20-position terminal block connector interface.
Hardware Specifications
Parameter
Specification
Model
TC-IXR061
Brand
Honeywell
Origin
USA
Weight
Standard Chassis Module Weight
Dimensions
Standard Experion Chassis Slot Footprint
Operating Temp
0 to +60 deg C
Power Consumption
4.3 W max
Input Channels
6 galvanically isolated channels
Supported Signal Types
Thermocouples (B, E, J, K, R, S, T, N, C), -12 mV to +30 mV
Resolution
16-bit (1.4 uV typical)
Isolation Voltage
2546 VDC (channel-to-channel, user-to-system)
Module Update Rate
50 ms for all channels
Common Mode Rejection
120 dB @ 60 Hz, 100 dB @ 50 Hz
Channel Bandwidth
0 to 15 Hz (-3 dB)
Cold Junction Compensation & Channel Isolation
Designed for accurate low-millivolt temperature instrumentation, the TC-IXR061 incorporates internal cold junction compensation (CJC) algorithms paired with robust 2546 VDC channel-to-channel and channel-to-system galvanic isolation. This architecture prevents common-mode noise propagation and ground loops across 4-20 mA HART and thermocouple sensing lines. Open circuit detection functions monitor sensor continuity every 5 seconds, while high common-mode rejection (120 dB @ 60 Hz) ensures measurement stability under noisy process control environments.
Frequently Asked Questions
Q: What thermocouple types and voltage ranges are natively supported by the TC-IXR061?
A: The module supports thermocouple types B, E, J, K, R, S, T, N, and C, as well as high-resolution direct millivolt input signals spanning -12 mV to +30 mV.
Q: How fast does the TC-IXR061 refresh field input data across all channels?
A: The module updates all 6 galvanically isolated input channels within 50 milliseconds, featuring a settling time of less than 80 milliseconds to 5% of full scale.
Field Installation Guidelines
Power off the target chassis or ensure the local area is non-hazardous prior to inserting the TC-IXR061 module into the rack.
Align the module card edges with the slot guides and push firmly until the backplane connector locks into position.
Wire field thermocouple lines to the 20-position terminal block, keeping signal lines separate from high-voltage AC cables.
Ground cable shields at a single chassis earth point to prevent ground loop interference across millivolt loops.
Verify cold junction reference stability and sensor continuity within the Experion system software after powering on the rack.
