The Honeywell CC-PDIS01, serves as the primary CC-PDIS01 Digital Input Module utilized to execute discrete state sensing across Experion Series C platforms. It processes 32 channels of 24 VDC digital input signals, monitoring contact closures, limit switches, and proximity devices to transmit binary status data over the C300 controller backplane.
Suffix Breakdown & Model Matrix
Base Model
Module Type
Coating Specification
Channel Density
CC-PDIS01
Standard Digital Input Module
Conformal Coated (G3)
32 Channels (24 VDC)
CC-PDIS11
High-Density Digital Input Module
Conformal Coated (G3)
32 Channels (24 VDC)
Hardware Specifications
Parameter
Specification
Model
CC-PDIS01
Brand
Honeywell
Origin
USA
Weight
3.0 Kg
Dimensions
Standard Series C Footprint
Operating Temp
0 to 60 deg C
Power Consumption
Backplane bus powered / 24 VDC field loop
Channel Capacity
32 Channels
Voltage Rating
24 VDC Discrete Input
Environmental Protection
G3 Conformal Coating (ANSI/ISA-71.04)
System Integration
Experion Series C I/O Carrier Chassis
Isolation Architecture and Field Signal Conditioning
The Honeywell CC-PDIS01 incorporates galvanic channel-to-channel isolation and field-to-backplane protection designed to prevent noise injection into control logic. Designed to operate within dense enclosure environments alongside 4-20 mA HART loop protocol wiring, the module features hardware filtering on all 32 discrete channels to eliminate contact bounce chatter. The conformal G3 protection layer preserves circuit trace integrity against corrosive atmospheric contaminants and airborne particulates.
Frequently Asked Questions
Q: Can the CC-PDIS01 module be removed or inserted while the Experion Series C carrier chassis is powered?
A: Yes, the module supports live insertion and removal (hot-swapping) under backplane power without disturbing neighboring operational I/O modules.
Q: What level of harsh environment protection is provided by the G3 PWA specification?
A: The G3 conformal coating specification protects internal componentry against ISA-S71.04 Class G3 harsh environmental levels, preventing corrosion caused by hydrogen sulfide and sulfur dioxide.
Field Installation Guidelines
Align the CC-PDIS01 card assembly guide channels with the designated slot on the Experion Series C carrier chassis.
Push the module firmly into place until the rear backplane pin headers fully engage and side locking tabs snap shut.
Verify the I/O carrier chassis is bonded directly to the main control cabinet protective earth (PE) bus.
Separate 24 VDC discrete field input wiring from high-voltage AC distribution circuits by at least 50 mm inside cabinet raceways.
Terminate field wiring shields to the cabinet ground bar, ensuring single-point grounding to prevent circulating ground currents.
