Configured for network protocol translation and deterministic fieldbus data exchange in Series 8 platforms, the Honeywell 8C-IP0102 (8C-IP0102 Profibus Gateway Module) provides direct physical/electrical execution.
Hardware Specifications
Parameter
Specification
Model
8C-IP0102
Brand
Honeywell
Base Model
8C-IP0102
Module Type
Profibus Gateway Module (PGM)
Origin
USA
Weight
0.42 kg
Dimensions
6 x 15 x 14.2 cm
Operating Temp
0 to 60 deg C
Power Consumption
430 mA max at 24 VDC
Storage Temp
-40 to 85 deg C
Network Type
Standard FTE node
Tariff Code
8537101190
Assembly Coating
PROFIBUS Gateway ASSY, Coated
FOUNDATION Fieldbus / Profibus PA Connectivity and Channel-to-Channel Isolation
The Honeywell 8C-IP0102 links plant-wide supervisory networks to fieldbus instrumentation loops. Operating as a standard Fault Tolerant Ethernet (FTE) node within the Experion Series 8 environment, the gateway interfaces supervisory control buses directly with PROFIBUS DP/PA field networks. Integrated channel-to-channel isolation barriers eliminate ground potential loops and isolate field communication noise from core controller backplane electronics. The module draws a maximum current rating of 430 mA from a 24 VDC power rail, processing high-density cyclic and acyclic fieldbus data transfers across field instrumentation protocols within an operating temperature envelope of 0 to 60 deg C.
Frequently Asked Questions
Q: What network role does the 8C-IP0102 gateway module fulfill within Honeywell Series 8 architectures?
A: The module operates as a standard Fault Tolerant Ethernet (FTE) node, functioning as a Profibus Gateway Module (PGM) to integrate fieldbus networks into the system control layer.
Q: What are the primary electrical power parameters for the 8C-IP0102 assembly?
A: The gateway operates on a 24 VDC input supply with a maximum current consumption rating of 430 mA.
Q: Is the 8C-IP0102 printed circuit assembly provided with conformal coating?
A: Yes, the 8C-IP0102 is specified as a coated PROFIBUS Gateway Assembly (ASSY).
Field Installation Guidelines
Power Isolation: Disconnect 24 VDC primary power feeds and auxiliary field communications lines before mounting or servicing the gateway module.
Carrier Installation: Align the module chassis with the card guide rails of the Series 8 mounting assembly. Slide the module inward until the rear connectors mate securely with the backplane.
Bus Termination & Shielding: Connect PROFIBUS network wiring using standard shielded twisted-pair cables. Ensure proper bus termination resistors are engaged at segment ends and bond cable shields to the main cabinet ground bus.
Thermal Management: Maintain required vertical spacing around the assembly to facilitate natural air convection within the specified 0 to 60 deg C operating temperature window.
