Configured for shielded data transmission in Experion PKS control networks, the Honeywell 05427-100 (51305489-600 Communication Cable) provides direct physical/electrical execution.
Hardware Specifications
Parameter
Specification
Model
05427-100 / 51305489-600
Brand
Honeywell
Origin
Global Manufacturing Facility
Weight
0.45 kg (approximate)
Dimensions
Standard factory cut: 1-3 meters length
Operating Temp
-20 deg C to +60 deg C
Power Consumption
Passive cabling assembly (0 W)
Cable Type
Twisted pair, shielded industrial-grade cable
Jacket Material
PVC or high-performance industrial polymer
Connector Type
Honeywell proprietary connectors with EMI shielding
4-20 mA HART Loop Protocol and Channel Isolation
The shielded twisted-pair cabling architecture maintains signal fidelity across high-frequency communication buses, minimizing electromagnetic interference (EMI) and cross-talk propagation between controllers and I/O racks. Channel-to-channel isolation is preserved through continuous shield grounding from end to end, preventing ground loop formation and common-mode voltage fluctuations. FOUNDATION Fieldbus and Profibus PA data transmission links benefit from low-attenuation signal paths, while internal thermal properties comply with cold junction compensation (CJC) standards across process interfaces.
Frequently Asked Questions
Q: Is this communication cable compatible with all Honeywell DCS modules?
A: The cable is designed for Experion PKS and selected Honeywell DCS modules; verifying the specific controller connector type is required prior to installation.
Q: Can the cable be deployed in outdoor or high-temperature environments exceeding 60 degrees C?
A: No. The standard operating temperature ranges from -20 deg C to +60 deg C. Specialized cabling solutions must be evaluated for extreme thermal conditions.
Q: How is electromagnetic shielding maintained across the cable assembly?
A: Shielding is executed via integrated foil and braid wraps bonded directly to the proprietary connector shells for continuous ground continuity.
Field Installation Guidelines
Route the communication cable through dedicated instrument cable trays, maintaining physical separation from high-voltage power lines and variable frequency drives.
Align the proprietary connectors carefully with the controller or I/O module ports, ensuring correct pin orientation before pressing home.
Tighten any integrated locking screws or latches on the connector housing to prevent accidental disconnection from mechanical vibration.
Verify communication link status and signal integrity using diagnostic software tools prior to system commissioning.
