The General Electric IC200CHS002B is a box-style I/O carrier designed for the VersaMax PLC system. This carrier provides the necessary physical mounting and electrical interface for VersaMax I/O modules, facilitating reliable field wiring connections in industrial automation environments. It features an integrated terminal block design, allowing for direct connection of field devices to the I/O modules.
Features
Designed for VersaMax I/O modules
Box-style terminal configuration with 36 terminals
Supports field voltages up to 264 VAC
Integrated field termination for simplified wiring
DIN rail mountable for standard industrial enclosures
Supports up to 2 Amps per point current rating
Technical Specifications
Model
IC200CHS002B
Product Type
Box-Style I/O Carrier
Terminal Count
36
Voltage Rating
0-264 VAC
Transient Voltage Rating
Up to 300 VAC
Per Point Current
2 Amps
Ground/Power Segment Current
8 Amperes
Mounting
DIN Rail (Horizontal)
Compatible Wire Size
AWG #14 to #22 (single); AWG #18 (two-wire)
Installation Guidelines
Ensure the power is disconnected from the system before installing or removing the carrier or any attached I/O modules.
Mount the carrier on a standard DIN rail in a horizontal orientation.
Maintain proper clearance for ventilation and maintenance: 2 inches (5.1 cm) at the top and bottom, and 1 inch (2.54 cm) on the sides.
Use appropriate wire gauges (AWG #14 to #22) to ensure secure connections and prevent overheating.
Follow standard ESD (Electrostatic Discharge) practices when handling the module to prevent damage to internal electronics.
Ensure all field wiring is properly routed and secured to minimize mechanical stress on the terminals.
FAQ
What is the primary function of the IC200CHS002B?
The IC200CHS002B acts as a base carrier for VersaMax I/O modules, providing the mechanical support and electrical terminal points required to connect field sensors and actuators to the PLC system.
Can this carrier be used with non-VersaMax modules?
No, this carrier is specifically engineered for the General Electric VersaMax series and is not compatible with other PLC I/O families.
