The GE IS210MACCH2AKH, also cataloged as the IS210MACCH2A I/O Board, operates as a dedicated hardware component for data collection, actuator control, and system diagnostics within Mark VI Gas Turbine and Wind Turbine Control Systems.
Hardware Specifications
Parameter
Specification
Model
IS210MACCH2AKH
Brand
GE
Origin
USA
Weight
0.24 kg (0.53 lbs)
Dimensions
148 mm x 103 mm x 32 mm
Operating Temp
-40 to +70 deg C (-40 to +158 deg F)
Power Consumption
Low-power bus supplied via Mark VI rack
Communication Interface
RS485 Serial Interface
Primary Functions
Data Collection, Actuator Control, Converter Control
Application
Mark VI Turbine Control System
Board Mounting
Internal Control Enclosure / Rack Mount
Deterministic Network Communication & Signal Conditioning
The GE IS210MACCH2AKH I/O board processes dynamic field input signals and actuator output commands to maintain high operational stability across gas and wind turbine platforms. Featuring an RS485 serial communication interface, the board transfers real-time diagnostic parameters and sensor data back to the central controller rack over deterministic network lines. Onboard firmware flash compatibility ensures synchronized timing execution and high-density I/O handling under continuous operating conditions.
Frequently Asked Questions
Q: What primary industrial application is the IS210MACCH2AKH board engineered for?
A: The IS210MACCH2AKH board is designed for GE Mark VI speedtronic platforms to manage turbine data collection, converter control, and actuator regulation on gas and wind turbines.
Q: What serial communication protocols are integrated into the IS210MACCH2AKH circuit board?
A: The board features integrated RS485 serial communication interfaces for deterministic data transfer and remote diagnostic polling.
Q: What precautions should be taken regarding operating temperature limits during cabinet installation?
A: The board is rated for operation between -40 to +70 deg C; cabinet forced-air ventilation must maintain internal enclosure temperatures within this range to prevent thermal stress.
Field Installation Guidelines
De-energize all primary supply lines and auxiliary control power feeds to the Mark VI enclosure before accessing the rack.
Put on an ESD anti-static wrist strap connected to a verified chassis ground terminal.
Position the IS210MACCH2AKH board carefully onto the designated rack standoffs or slot guides.
Tighten retaining hardware hand-tight to ensure complete grounding continuity between the board frame and cabinet metalwork.
Plug RS485 serial cables and I/O field harnesses into matching connectors, verifying clean cable routing and locking engagement.
