GE IS200TBAIH1CDC Analog Input/Output Terminal Board

Description

The GE IS200TBAIH1CDC, also cataloged as the IS200TBAIH1CDC Analog Input/Output Terminal Board, is part of the Mark VIe control system. It provides 10 analog input channels and 2 analog output channels, supporting multiple transmitter types and configurable current ranges. The board is designed as a double-slot terminal interface with integrated noise suppression circuitry.

Hardware Specifications

• Part No.: IS200TBAIH1CDC

• Manufacturer: General Electric

• Country of Manufacture: United States of America (USA)

• Series: Mark VIe

• Product Type: Analog Input/Output Terminal Board

• Number of Channels: 12 (10 inputs, 2 outputs)

• Input Span: 1-5 VDC transmitters

• Output Range: 0-20 mA, optional 0-200 mA with PAICH2

• Temperature Range: -30 to 65 deg C

• Size: 10.16 cm wide x 33.02 cm high

• Connector Configuration: Three DC-37 pin connectors (JR1, JR2, JR3)

• Availability: In Stock

Profinet / EtherNet/IP Deterministic Networks

The IS200TBAIH1CDC integrates into Mark VIe racks with deterministic communication over Profinet or EtherNet/IP. Input signals are fanned out across R, S, and T channels in TMR applications, while outputs combine currents from redundant drivers through a measuring shunt. This ensures synchronized regulation to commanded setpoints, maintaining deterministic timing across redundant paths. Firmware flash compatibility allows in-system updates without disrupting analog signal handling.

Frequently Asked Questions (FAQ)

Q: Can the IS200TBAIH1CDC outputs be configured beyond 20 mA? A: Yes. With the PAICH2 option, the first output supports up to 200 mA.

Q: How are signals managed in TMR applications? A: Inputs are distributed to three connectors for R, S, and T controls, while outputs combine currents from three drivers and regulate via a shunt.

Q: Does the board include built-in surge protection? A: Yes. Noise suppression circuitry is integrated on both inputs and outputs to protect against surge and high-frequency interference.

Field Installation Guidelines

• Mount the board securely in the Mark VIe rack with proper connector alignment.

• Use shielded cabling for analog inputs and outputs to minimize noise.

• Verify transmitter wiring type (two-wire, three-wire, four-wire, or externally powered) before connection.

• Ensure grounding practices are followed for surge suppression circuits.

• In TMR systems, confirm all three DC-37 connectors are engaged for proper redundancy.