TheGE Fanuc IC693MDL741is a 12/24 Volt DC, 0.5 AmpNegative Logic (Sinking) Output module for the Series 90-30 PLC. This 16-point module is designed to interface between the PLC and low-voltage DC loads such as solenoids, motor starters, and indicators. It provides a reliable interface for switching power to field devices while maintaining isolation from the PLC backplane.
Specifications
Model Number:IC693MDL741
Output Voltage:12 to 24 VDC (+10%, -15%).
Output Points:16 points (arranged in two groups of 8).
Current Rating:0.5 Amps maximum per point (2 Amps maximum per common).
Logic Type:Negative Logic (Sinking); the module provides the ground connection to the load.
Inrush Current:2.0 Amps maximum for 10 milliseconds.
Response Time:0.5 milliseconds maximum (On/Off).
Power Consumption:80 mA from the +5 VDC bus on the backplane.
Features
Optical Isolation:Features internal opto-couplers to provide a high degree of electrical isolation between the field wiring and the sensitive PLC backplane.
Status Monitoring:Includes 16 individual green LED indicators at the top of the module to provide immediate visual confirmation of each output state.
User-Friendly Wiring:Equipped with a removable terminal block, allowing for pre-wiring or quick module replacement without disconnecting field leads.
Negative Logic Design:Specifically engineered for sinking applications where the load is connected between the positive supply and the module output.
Standard Compatibility:Fits into any I/O slot of a Series 90-30 PLC system, including local, expansion, or remote baseplates.
Hinged Door:Features a clear, hinged faceplate with an insert for labeling signal names or wire numbers for organized maintenance.
