• Home
  • GE 44A719381-G01+44A724873-G01 PLC Modules

Sale

Sale

GE 44A719381-G01+44A724873-G01 PLC Modules

In stock!
  • Part Number: 44A719381-G01+44A724873-G01
  • Brand: General Electric
  • Type: Programmable Logic Controller Modules
  • Dimensions: 4x18.5x12.7cm
  • Country of Origin: USA
  • Barcode: 8537101190

Additional Specifications

Color / Pattern
  • Black
  • Gray
Power Source
  • DC-powered
Communication Protocols
  • Ethernet
Controller Design
  • Modular
Tags: GE Control Systems , Programmable Logic Controller Modules

Product Description

Configured for industrial automation and process control architectures, the GE 44A719381-G01 and 44A724873-G01 (44A719381-G01 and 44A724873-G01 PLC Modules) provide direct physical/electrical execution.

Suffix Breakdown & Model Matrix

Suffix / Identifier Technical Description / Hardware State
44A719381 / 44A724873 Core part family designations representing specific programmable logic controller hardware architectures.
-G01 Manufacturing and revision group suffix indicating specific hardware build states and component configurations.

Hardware Specifications

Parameter Specification
Model 44A719381-G01 / 44A724873-G01
Brand GE
Origin USA
Weight Standard modular weight class
Dimensions Standard enclosure format designed for DIN-rail mounting
Operating Temp -10 deg C to +60 deg C
Power Consumption Dependent on backplane bus load and I/O channel activation
Voltage Requirements Typically 24 VDC or 120 VAC nominal
I/O Signal Capacity 8 to 32 digital or analog points depending on configuration

Backplane Bus Communication Velocity and Firmware Compatibility

The modules interface via deterministic internal backplane buses to coordinate data exchange with central processing units and neighboring system cards. Firmware flash compatibility is managed through onboard memory components that align operational parameters with system-level software revisions. Backplane bus communication velocity operates within rigid timing constraints to prevent packet jitter during multi-point signal scanning. I/O density scaling supports flexible channel groupings while maintaining isolated signal processing and robust transient protection across both module units.

Frequently Asked Questions

Q: What are the standard operating temperature limits for these modules?

A: The modules are designed to operate reliably within an ambient temperature range of -10 deg C to +60 deg C under standard convection cooling conditions.

Q: Can this hardware be hot-swapped during active system execution?

A: Hot-swapping capabilities depend on the specific rack backplane design; standard procedure mandates isolating rack power to prevent backplane bus faults or data corruption.

Q: What power supply inputs are generally required for these module types?

A: The units typically operate on standard industrial control voltages such as 24 VDC or 120 VAC depending on the specific loop configuration.

Field Installation Guidelines

  1. Ensure the main PLC rack power supply is fully de-energized and locked out before handling or installing the modules.
  2. Inspect the target mounting slots on the DIN rail or backplane for mechanical obstructions or debris.
  3. Align the module housings with the mounting guides and press firmly until the enclosures seat securely against the backplane interface.
  4. Fasten any mechanical retention clips or screws to guarantee structural stability and proper grounding continuity against panel vibration.
  5. Terminate field wiring to the corresponding I/O terminal blocks, verifying proper shielding and voltage matching prior to powering up the system.
View Full Details
Recently viewed products