The Honeywell FS-TSDO-0824, also cataloged as the TSDO-0824 Safe Digital Output FTA, operates as a termination assembly for eight-channel 24 VDC solid-state outputs within Honeywell Safety Manager systems. It provides safe current-limited distribution with defined mechanical and electrical parameters.
Hardware Specifications
Model: TSDO-0824
Brand: Honeywell
Origin: USA
Weight: 3 Kg
Dimensions (D × W × H): 6 cm × 7 cm × 5.8 cm
Operating Temp: 0 to 60 deg C typical
Power Supply: 24 VDC nominal (defined by connected output module)
Output Channels: 8 digital outputs
Maximum Voltage: 36 VDC (IEC 1010, overvoltage category 3)
Continuous Current per Channel: 1.5 A (actual maximum defined by connected module)
Rail Mounting: DIN EN TS32 / TS35 × 7.5, rail length 61 mm (2.40 in)
The FS-TSDO-0824 employs channel-to-channel isolation to ensure that overload or short-circuit conditions remain localized. Current limitation is defined by the connected output module, while mechanical termination ensures safe installation in hazardous environments. This design supports compliance with IEC and ATEX/IECEx standards for safe output distribution.
Frequently Asked Questions
Q: Can the FS-TSDO-0824 be hot-swapped during operation?
A: Hot-swap is supported when output circuits are isolated; loads must be de-energized before removal or insertion.
Q: How does the module handle overload detection?
A: Overload protection is defined by the connected output module; the FTA provides safe mechanical termination only.
Q: What is the maximum wire size supported?
A: The screw terminals support up to 2.5 mm² (AWG 14) conductors with a strip length of 7 mm.
