The Honeywell FC-IOCHAS-0002R serves as an I/O Chassis designed to house and interconnect Series C I/O modules, providing mechanical support, electrical backplane connectivity, and redundant system integration capability.
Hardware Specifications
Model: FC-IOCHAS-0002R
Brand: Honeywell
Origin: Not specified
Weight: Not specified
Dimensions: Not specified
Operating Temp: Not specified
Product Type: I/O Chassis
System Compatibility: Honeywell Series C Safety Manager / DCS systems
Slots Available: Multiple module positions for I/O expansion
Power Supply: Supports redundant 24 V DC rack power modules
Cooling: Passive airflow design
Mounting: Standard cabinet/rack installation
Signal Insulation: Module dependent; chassis provides backplane isolation
Withstanding Voltage: 1500 V AC/min (system dependent)
Redundant Architecture
The FC-IOCHAS-0002R supports redundant I/O module configurations, enabling fault‑tolerant operation in safety‑critical environments. Backplane design ensures stable communication between modules and system controllers. Redundancy minimizes downtime by allowing seamless switchover during module or power supply failure.
Frequently Asked Questions (FAQ)
Q: How many modules can be installed in the FC-IOCHAS-0002R? A: The chassis supports multiple slots for Series C I/O modules; exact capacity depends on system configuration.
Q: Does the chassis provide its own power supply? A: No, it supports redundant 24 V DC rack power modules that must be installed separately.
Q: Can modules be hot‑swapped in this chassis? A: Hot‑swap capability is supported at the module level; system power and redundancy must be verified before replacement.
Field Installation Guidelines
Mount the chassis securely into the designated cabinet or rack.
Ensure proper alignment of modules with backplane connectors before insertion.
Connect wiring to terminal blocks using M4 screws with correct torque.
Maintain shield grounding at a single point to prevent ground loops.
Separate I/O signal wiring from high‑voltage cabling to minimize interference.
Verify redundant power supply installation before commissioning.
