Bently Nevada 330130-085-00-05 high-fidelity coaxial extension cable

Product Overview

The 330130-085-00-05 is a high-fidelity coaxial extension cable engineered to bridge the signal path between a 3300 XL 8mm proximity probe and its corresponding Proximitor sensor. In critical machinery protection, maintaining precise system capacitance is mandatory; this 8.5-meter cable is factory-calibrated to ensure that vibration and axial position data remain linear across the entire displacement range. Its high-grade FEP construction allows for reliable operation in the presence of extreme temperatures and corrosive industrial fluids.

Engineering Specifications

The 330130-085-00-05 adheres to the following technical parameters:

• System Compatibility: 3300 XL 8mm Proximitor Transducer System

• Total Length: 8.5 Meters (approx. 27.9 ft)

• Jacket Material: Non-armored Fluorinated Ethylene Propylene (FEP)

• Characteristic Impedance: 75 $\Omega$

• Operating Temperature: -51 °C to +177 °C (-60 °F to +350 °F)

• Minimum Bend Radius: 25.4 mm (1.0 inch)

• Connector Type: Miniature gold-plated coaxial (male/female)

• Certification: Multiple Agency Approvals (ATEX, IECEx, CSA, etc.)

Configuration Matrix (Model Breakdown)

The nomenclature for the 330130-085-00-05 specifies the following physical and regulatory build:

• -085 (Length Option): Indicates an 8.5-meter cable length. This specific length is typically utilized to achieve a 9.0-meter total electrical system length when paired with a 0.5-meter probe lead.

• -00 (Connector Protector Option): This version is supplied without connector protectors. It is ideal for installations where the cable is routed entirely through a clean, dry conduit or where a slim profile is required for tight cable glands.

• -05 (Agency Approval Option): Denotes Multiple Approvals. This confirms the cable meets international safety standards for intrinsically safe and hazardous area applications globally.