TheBently Nevada 330130-00-05-10-02-CNis an 8mm proximity sensor from the3300 XL series, specifically configured with a 3/8-24 UNF thread and a 1.0-meter integrated cable. Engineered for precision machinery protection, it captures high-frequency vibration and displacement data from rotating shafts. By monitoring the gap between the probe tip and the target, it provides the critical input needed for early detection of bearing wear, unbalance, and misalignment in high-speed industrial equipment.
Technical Specifications
Model Number:330130-00-05-10-02-CN
Probe Tip Diameter: 8.0 mm (0.31 in)
Mounting Thread: 3/8-24 UNF-2A (English Thread)
Linear Range: 2.0 mm (80 mils)
Scale Factor: 7.87 V/mm (200 mV/mil)
Operating Temp: -51 °C to +177 °C (-60 °F to +351 °F)
Pressure Seal: Viton® O-ring, sealed to 70 psi (4.8 bar)
Case Material: AISI 303 or 304 Stainless Steel
Tip Material: Polyphenylene Sulfide (PPS)
Typical Applications
Radial Vibration: Measuring shaft dynamic motion within fluid-film bearings to identify rotor instability.
Axial Position: Tracking thrust movement to prevent internal contact between rotors and stators.
Phase Reference: Providing Keyphasor® pulses for RPM measurement and phase-angle diagnostics.
Eccentricity: Monitoring rotor bow during slow-roll startup sequences in turbines.
Rod Position: Tracking piston rod movement in large reciprocating compressors.
