The Bently Nevada 330103-00-06-10-02-CN is a 3300 XL 8 mm proximity probe designed for high-precision vibration and position monitoring in industrial rotating machinery. This probe is part of the Bently Nevada 3300 XL transducer system, which provides a linear output voltage proportional to the distance between the probe tip and the observed conductive surface. It is engineered to withstand harsh industrial environments while maintaining signal integrity for critical machinery protection.
Features
8 mm probe tip diameter for standard proximity sensing applications.
M10 x 1 thread configuration for secure mounting.
Includes a 1.0-meter (3.3 feet) cable length.
Equipped with a miniature coaxial ClickLoc connector for reliable signal transmission.
Standard cable construction without armor.
60 mm case length with 0 mm minimum unthreaded length.
Technical Specifications
Product Model
330103-00-06-10-02-CN
Probe Diameter
8 mm
Thread Size
M10 x 1
Case Length
60 mm
Unthreaded Length
0 mm
Cable Length
1.0 meter (3.3 feet)
Connector Type
Miniature coaxial ClickLoc
Armor
None
Installation Guidelines
Ensure the probe is mounted in a rigid bracket to prevent mechanical resonance that could interfere with vibration readings.
When installing, ensure the probe tip is not in contact with the target surface; maintain the specified gap as defined by the monitoring system configuration.
Use caution when routing the coaxial cable to avoid sharp bends or proximity to high-voltage power lines to minimize electromagnetic interference (EMI).
Ensure the ClickLoc connector is fully seated and locked to prevent signal loss or intermittent connections.
The probe should be installed by qualified personnel familiar with Bently Nevada transducer system calibration and gap voltage requirements.
FAQ
What is the primary function of the 330103 probe?
This probe is used to measure the gap between the probe tip and a conductive target, providing a signal used to monitor shaft vibration, axial position, and speed in rotating equipment.
Is this probe compatible with standard 3300 XL extension cables?
Yes, this probe is designed to be used with standard Bently Nevada 3300 XL extension cables that feature matching ClickLoc connectors.
