Bently Nevada 330101‑05‑36‑05‑02‑00 3300 XL 8 mm Proximity Probe
The Bently Nevada 330101‑05‑36‑05‑02‑00 is a factory‑configured 3300 XL 8 mm proximity probe, used for vibration, shaft position, and rotor‑dynamic measurements in machinery protection systems. Below is the complete datasheet‑style technical entry with full suffix breakdown.
Suffix Breakdown & Model Matrix
330101 — 3300 XL 8 mm proximity probe
05 — Unthreaded length option (0.5 in equivalent configuration class)
36 — Overall case length = 3.6 in
05 — Integral cable length = 0.5 m
02 — Miniature coaxial ClickLoc connector, standard cable
00 — No agency approvals required
Hardware Specifications
Parameter
Specification
Manufacturer
Bently Nevada
Product No.
330101‑05‑36‑05‑02‑00
Product Type
3300 XL 8 mm Proximity Probe
Origin
Made in U.S.A
COO
Available upon request
Unthreaded Length
0.5‑in class option
Overall Case Length
3.6 in
Integral Cable Length
0.5 m
Connector Type
Miniature coaxial ClickLoc
Agency Approval
Not required
Application & System Behavior
The probe is part of the 3300 XL proximity transducer system, consisting of:
Probe
Extension cable
Proximitor driver
This system provides:
Stable gap‑voltage behavior
Defined linear range for shaft vibration and position
Controlled system impedance
Accurate frequency response for rotor‑dynamic measurements
The 8 mm probe is widely used in turbomachinery, compressors, pumps, and critical rotating equipment.
Field Installation Guidelines
Do not cut or modify the probe cable; factory termination preserves calibration.
Maintain proper bend radius to avoid altering coaxial geometry.
Route away from high‑frequency switching conductors to reduce induced noise.
Ensure ClickLoc connector is fully seated before energizing the system.
Avoid mixing XL probes with NSv probes to prevent impedance mismatch.
