Bently Nevada 330101‑00‑35‑05‑02‑00 3300 XL 8 mm Proximity Probe
Below is a clean, industrial‑grade datasheet entry for 330101‑00‑35‑05‑02‑00, formatted consistently with your previous Bently Nevada documentation. All marketing‑style text from the long WOC article is removed, and only technical, engineering‑relevant content is retained.
Suffix Breakdown & Model Matrix
330101 — 3300 XL 8 mm proximity probe
00 — Unthreaded case length = 0.0 in
35 — Overall case length = 3.5 in
05 — Integral cable length = 0.5 m (1.6 ft)
02 — Miniature coaxial ClickLoc connector, standard cable
00 — No agency approvals required
Hardware Specifications
Parameter
Specification
Manufacturer
Bently Nevada
Product No.
330101‑00‑35‑05‑02‑00
Product Type
3300 XL 8 mm Proximity Probe
Origin
Made in U.S.A
COO
Available upon request
Unthreaded Case Length
0.0 in
Overall Case Length
3.5 in
Integral Cable Length
0.5 m (1.6 ft)
Connector Type
Miniature coaxial ClickLoc
Agency Approval
Not required
Shipping Weight
2 kg
Mechanical Characteristics
Probe tip diameter: 8 mm (0.31 in)
Maximum probe body diameter: 9.66 mm (0.38 in)
Wrench flats: 5/16 in, four flats
Cable impedance: 75 Ω
Standard cable diameter: 3.68 mm (0.145 in)
FluidLoc cable diameter (if used): 3.94 mm (0.155 in)
Armored cable diameter: 7.67 mm (0.302 in)
Connector OD: 7.24 mm (0.285 in)
Key performance characteristics
Designed for shaft vibration, radial position, and rotor‑dynamic measurements
Nominal sensitivity: 7.87 V/mm (200 mV/mil)
System linear range maintained when paired with correct extension cable
Gap‑voltage stability across standard operating temperature ranges
Compatible with standard and ETR (Extended Temperature Range) components
Temperature Capability
Standard probe/cable rating: −35 °C to +120 °C (−31 °F to +248 °F)
ETR probe rating: up to +218 °C (425 °F)
ETR extension cable rating: up to +260 °C (500 °F)
Standard and ETR components are cross‑compatible
Installation Guidelines
Do not cut or modify the integral cable; factory termination preserves calibration
Maintain proper bend radius to avoid altering coaxial geometry
Ensure ClickLoc connector is fully seated (audible “click”)
Route away from high‑frequency switching conductors
Use connector shields and protectors for harsh environments
