TheBently Nevada 170180-01-00 Proximitor®/Accelerometer I/O Moduleis designed to interface with proximity and acceleration transducers, ensuring precise monitoring of vibration and shaft position in rotating machinery. It delivers fast, stable signal processing and reliable protection through configurable alarm settings, enabling continuous equipment health analysis.
This module features high accuracy, wide signal range, and flexible configuration for integration into the 1701 monitoring system. Its rugged design and wide environmental limits make it ideal for demanding industrial environments.
Technical Specifications
Category
Specification
Accuracy & Resolution
Direct accuracy: 1% of full-scale (max)
Direct resolution: 0.1% of full-scale
Gap accuracy: ±20 mV (-1 to -23 V)
Gap resolution: 1 mV
Setpoint resolution: 0.5% of full-scale
Power Supply
-24 V and +5 V (from 1701 Power Supply)
Power consumption: 1.5 W (excluding transducers)
Signal Processing
Direct filter: -3 dB at 1.2 Hz
Gap filter: -3 dB at 0.041 Hz
Full-scale direct range (mils): ±10 to ±75
Full-scale gap range: 24 V
Alarm Options
Alarm 1 (Alert) / Alarm 2 (Danger): Over/Under on Direct
Alarm delay: 0.15 to 20.0 seconds
Alarm hysteresis: 0.5% of full-scale
Non-latching alarms only
Buffered Output
30 m (100 ft) cable at 60 pF/ft, not isolated
Output impedance: 200 Ω
Mechanical
Dimensions (H × W × D): 127 × 21.6 × 105 mm
Weight: 314 g (0.69 lb)
Environmental Limits
Operating temperature: -20°C to +70°C (-4°F to +158°F)
Storage temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5%–95%, non-condensing
Programmable Parameters
Channel On/Off, Reset, Inhibit, Trip Multiply
Proportional values: Direct / Gap
Normal Thrust Direction
Toward or away from probe
Flex Read/Write Rate
≥ 25 ms (monitor to Flex adapter)
Ordering Information Model:170180-01-00 Description: Proximitor®/Accelerometer I/O Module (3300 5 mm compatible)
