Bently Nevada 16710-15 Interconnect Cable with Armor
The Bently Nevada 16710-15, also cataloged as the 16710 interconnect cable, operates as a dedicated armored signal link for proximity and relay‑related routing within Bently Nevada monitoring networks.
Hardware Specifications
Parameter
Specification
Model
16710-15
Brand
Bently Nevada
Origin
U.S.A
Weight
0.131 kg
Dimensions
Not specified
Operating Temp
Not specified
Power Consumption
Not applicable (passive cable)
Core Performance Indicators
Armored interconnect cable, 15 ft length
Eddy‑Current Probe Scaling & Gap Voltage Behavior
Within Bently Nevada architectures, interconnect cables must preserve the integrity of eddy‑current probe scaling and gap‑voltage validation. The 16710‑15 maintains stable conductor geometry and shield continuity, preventing drift in the nominal −10 VDC gap reference used by proximity systems. The armored sheath reduces micro‑motion and suppresses cross‑talk when routed near vibration or relay wiring, ensuring rotor‑dynamics signals remain free of induced noise.
Frequently Asked Questions
Q: Can the 16710‑15 be connected or removed while the monitoring rack is energized? A: As a passive cable, physical replacement is possible, but connected modules should be de‑energized to avoid unintended relay or proximity‑channel state changes.
Q: Does cable length affect proximity probe scaling? A: Length influences total loop impedance. Only approved cable lengths should be used to maintain correct probe calibration and gap‑voltage linearity.
Q: Are firmware or configuration changes required when replacing this cable? A: No. All configuration resides in the monitoring module; the cable contains no firmware.
Field Installation Guidelines
Maintain shield termination at the monitoring end to ensure proper noise suppression.
Route the armored cable away from high‑current motor feeders to minimize induced interference.
Avoid sharp bends that may compromise conductor spacing or the armored sheath.
Verify connector seating before energizing associated monitoring modules.
Prevent mechanical strain by securing the cable along its run with appropriate clamps.
