Allen-Bradley 80026-096-01 DC Power Supply Module

Configured for high-current DC power conversion and distribution in Allen-Bradley automation control systems, the Allen-Bradley 80026-096-01 (80026-096 Power Supply) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

The 80026-096-01 model designation specifies a high-output DC-to-DC power converter within the 80026 hardware series. The base model identifier 80026-096 designates the core switching regulator topology and dual input range design, while the suffix -01 indicates the internal circuit revision and standard assembly specification.

Hardware Specifications

Backplane Bus Communication Velocity & EtherNet/IP Integration

The Allen-Bradley 80026-096-01 power conversion module features native EtherNet/IP communication capability to deliver real-time operational telemetry, voltage status, and fault diagnostics directly to the primary PLC CPU. Operating with high backplane bus communication velocity across connected ControlLogix or CompactLogix platforms, the unit regulates 12 VDC or +24 VDC output rails delivering up to 50 A continuous current. Integrated signal filtering suppresses voltage ripple across the industrial automation DC bus.

Frequently Asked Questions

Q: What primary input voltage ranges are supported by the 80026-096-01 module?

A: The module accommodates standard industrial DC input ranges covering 12-24 VDC and 24-48 VDC operating windows.

Q: What network protocols does the 80026-096-01 use for remote diagnostics?

A: The unit features an integrated EtherNet/IP interface for real-time monitoring of output current, voltage levels, and thermal conditions across the network.

Q: Can the 80026-096-01 power supply be hot-swapped while under load?

A: No, incoming DC power feeds must be completely de-energized and isolated prior to mounting or removing the power module to prevent electrical arcing.

Field Installation Guidelines

1. Isolate and lock out incoming primary DC power supplies feeding the installation panel before opening the cabinet.
2. Put on an anti-static wrist strap connected to a verified earth ground point prior to handling the module.
3. Position the 80026-096-01 module on the cabinet mounting panel and tighten all mechanical fasteners to secure the unit.
4. Establish low-impedance protective earth grounding by connecting a heavy-gauge bonding wire to the chassis ground stud.
5. Terminate DC input, output, and EtherNet/IP network cables to their designated ports, ensuring correct voltage polarity before applying power.