The Allen-Bradley 1783-MS06T, also cataloged as the 1783-MS06T Ethernet Switch, operates as a dedicated hardware component for deterministic packet routing and managed network traffic segregation within Stratix 8000 systems.
Hardware Specifications
Parameter
Specification
Model
1783-MS06T
Brand
Allen-Bradley
Origin
USA / Global Manufacturing standard
Weight
9.48 lbs (4.30 kg)
Dimensions
Compact DIN-rail industrial enclosure form factor
Operating Temp
0 to 60 deg C (32 to 140 deg F)
Power Consumption
Current rating: 2 A at 18-60 VDC input
Port Configuration
6 Fast Ethernet copper ports, 2 dual-purpose ports (SFP slots)
Operating as a Layer 2 managed network appliance within the Allen-Bradley Stratix 8000 architecture, the 1783-MS06T processes real-time EtherNet/IP control traffic using dedicated hardware switching mechanisms. The unit maintains deterministic network timing and QoS packet prioritization across its 6 copper ports and SFP SFP uplinks, preventing frame jitter from degrading time-critical automation scans or backplane bus communication velocity in distributed PLC topologies.
Frequently Asked Questions
Q: How are the SFP combo ports on the 1783-MS06T configured for fiber optic transmission?
A: The 2 dual-purpose ports accept standard industrial SFP transceiver modules. Inserting an SFP module automatically disables the corresponding RJ45 copper interface for that channel.
Q: Can the 1783-MS06T operate under redundant power input sources?
A: Yes, the 18-60 VDC power terminal block supports dual redundant DC power feeds, allowing seamless switch operation without reset if one power source fails.
Field Installation Guidelines
Mount the 1783-MS06T module onto a standard 35 mm DIN rail inside an appropriately rated enclosure.
Connect functional earth ground to the chassis grounding terminal using a low-impedance copper conductor.
Wire the 18-60 VDC supply leads to the pluggable screw terminal block, verifying polarity before applying power.
Insert Cat5e or Cat6 industrial shielded twisted-pair (STP) Ethernet cables into the RJ45 copper ports until the retaining latch locks securely.
Ensure SFP fiber optic transceivers are fully latched into the dual-purpose ports before connecting fiber patch cables.
