The ABB XFD213A, also cataloged under manufacturing part number 3BHE028122R0001, operates as a dedicated hardware component for high-precision rotational velocity monitoring, synchronous serial encoder data translation, and real-time process speed data transmission within industrial automation and motion control systems.
Hardware Specifications
Parameter
Specification
Model
XFD213A
Part Number
3BHE028122R0001
Brand
ABB
Origin
Switzerland / Germany
Product Type
Intrinsic Safety & Network Modules
Core Signaling Technology
Synchronous Serial Interface (SSI)
System Execution Profile
High-precision speed sensing and data transmission
Tracked Speed Range
0 to 10,000 RPM continuous
Internal Bit Resolution
13-bit configuration (0.01 RPM increments)
Baseline Measurement Accuracy
±0.05% of full scale / ±0.1% of reading
Operating Voltage Scope
12 V to 36 V DC field loop power
Internal Logic Power Supply
5 V DC
Operational Power Draw
<50 mA @ 5 V DC
Physical Network Protocol
RS-485 serial communication bus
Enclosure Ingress Rating
IP65 (Dust-tight and water jet resistant)
Mechanical Coupling Point
M12 × 1.6 mm threaded connector
Physical Dimensions
100 mm x 60 mm x 25 mm
Net Module Weight
0.3 kg (0.66 lbs)
Industrial Control and Drives Backplane Communication Velocity
The XFD213A acts as a master controller for absolute optical or magnetic encoders, sending clock signal trains to poll positional bitstreams via Synchronous Serial Interface (SSI) architecture. To support real-time speed tracking in high-performance drive configurations or turbine control systems, the module converts raw serial bit arrays into calibrated RPM values and transfers them across the primary bus network at maximum backplane bus communication velocity. This rapid sampling capability prevents timing drift and loop latency across the 0 to 10,000 RPM velocity band. The module supports flexible I/O density scaling options across the physical bus layout. Full firmware flash compatibility allows internal filtering constants, SSI clock frequencies, and error-checking parameters to be reconfigured directly over the RS-485 network.
