- Home
- 900P01-0101 | Honeywell | P01 Power Supply Module
Sale
900P01-0101 | Honeywell | P01 Power Supply Module
No reviews
In stock!
- Part Number: 900P01-0101
- Brand: Honeywell
- Type: Power Supply Module
- Dimensions: 3.7×14×13.6cm
- Country of Origin: USA
- Barcode: 8537101190
Share
Additional Specifications
| Color / Pattern |
|
| Power Source |
|
| Communication Protocols |
|
| Controller Design |
|
Product Description
Honeywell 900P01‑0101 P01 Power Supply Module
The Honeywell 900P01‑0101, also cataloged as the 900P01‑0101 P01 power supply module, operates as a dedicated AC‑to‑DC conversion unit for ControlEdge HC900 racks, providing regulated 5 VDC and 24 VDC distribution for controllers, scanners, and local or remote I/O assemblies.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 900P01‑0101 |
| Brand | Honeywell |
| Origin | ControlEdge HC900 Platform |
| Weight | Not specified (shipping weight 3 kg) |
| Dimensions | Not specified |
| Operating Temp | Not specified |
| Power Consumption | Input rating 130 VA |
| Operating Voltage | 90 to 264 V AC, 47 to 63 Hz |
| Output Rating | 60 W |
| Output Voltages | 5 VDC and 24 VDC |
| Inrush Current | 7 A peak‑to‑peak for 150 ms at 240 V AC |
| Fuse | Internal, non‑replaceable |
| Wiring | Screw terminals, #12–22 AWG |
| Test Jacks | 5 VDC, 24 VDC |
| Hold‑Up Time | 20 ms @ 115 V AC, 60 Hz (maximum load) |
| Replacement Model | 900P01‑0301 |
4‑20 mA HART Loop Protocol and Channel Isolation Behavior
Within HC900 process‑control architectures, the P01 supply stabilizes DC rails used by analog modules handling 4‑20 mA HART loop protocol. The regulated 5 VDC and 24 VDC outputs minimize ripple that could interfere with HART frequency modulation. When powering mixed analog modules, channel‑to‑channel isolation inherent to HC900 I/O is preserved, preventing cross‑loop interference and maintaining predictable analog update timing.
Frequently Asked Questions
Q: Can the 900P01‑0101 be hot‑swapped while the rack is energized? A: No. The module is not designed for hot‑swap. Removal or insertion must occur only when the HC900 rack is de‑energized.
Q: Does the 60 W rating require de‑rating for large I/O configurations? A: The 60 W capacity requires minimal de‑rating for standard HC900 I/O modules. Large or high‑density racks should follow Honeywell’s loading guidelines.
Q: Are the 5 VDC and 24 VDC test jacks intended for powering external devices? A: No. The test jacks are measurement points only and must not be used as auxiliary power outputs.
Field Installation Guidelines
- Maintain proper torque on screw‑type terminals to ensure stable conductor engagement within the #12–22 AWG range.
- Route AC input wiring separately from low‑voltage DC output conductors to reduce electromagnetic coupling.
- Bond shielded cable grounds at a single point to prevent circulating currents.
- Ensure adequate airflow around the module to prevent thermal buildup within the enclosure.
- Keep the tool‑secured door closed during operation to protect voltage connections and prevent accidental contact.
Have a Question?
