- Home
- 330102-60-90-10-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probe
Sale
330102-60-90-10-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probe
No reviews
In stock!
- Part Number: 330102-60-90-10-02-05
- Brand: Bently Nevada
- Type: 3300 XL 8 mm Proximity Probes
- Dimensions: 112x1.5x1.2cm
- Country of Origin: USA
- Barcode: 8537101190
Share
Additional Specifications
| Color / Pattern |
|
Product Description
Bently Nevada 330102-60-90-10-02-05 3300 XL 8 mm Proximity Probe
The Bently Nevada 330102‑60‑90‑10‑02‑05, part of the 3300 XL 8 mm Proximity Probe family, is a rugged, armored eddy‑current transducer designed for vibration, thrust position, and speed/phase reference measurements in turbomachinery such as turbines and compressors.
Suffix Breakdown & Model Matrix
- 330102 — 3300 XL 8 mm proximity probe, 3/8‑24 UNF thread, armored
- 60 — Unthreaded length option (6.0 in)
- 90 — Case length option (9.0 in)
- 10 — Cable length = 1.0 m (3.3 ft)
- 02 — Miniature coaxial ClickLoc connector with standard cable
- 05 — Agency approvals = CSA, ATEX, IECEx
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330102‑60‑90‑10‑02‑05 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Tip Diameter | 8 mm |
| Thread Size | 3/8‑24 UNF |
| Case Length | 9.0 in |
| Cable Length | 1.0 m (3.3 ft) |
| Connector Type | Miniature coaxial ClickLoc, standard cable |
| Agency Approval | CSA, ATEX, IECEx |
| Linear Range | 2 mm (80 mils) |
| Output Sensitivity | ~200 mV/mil |
| Operating Temperature | –40 °C to +85 °C (–40 °F to +185 °F) |
| Ingress Protection | IP67 |
| Applications | Radial vibration, axial thrust position, speed/phase reference |
Functional Description
This probe employs eddy‑current transducer technology to deliver a proportional voltage output relative to shaft displacement. The armored design enhances mechanical protection, while IP67 ingress protection ensures reliable operation in environments exposed to dust, oil, and moisture. Hazardous‑area approvals (CSA, ATEX, IECEx) certify the probe for use in explosive or high‑risk industrial zones.
Frequently Asked Questions
Q: Can the 330102‑60‑90‑10‑02‑05 be hot‑swapped? A: No. Probes must be disconnected only when the system is de‑energized to preserve calibration integrity.
Q: How does the armored design improve reliability? A: Stainless steel armor protects the cable from mechanical damage and harsh environmental exposure.
Q: What applications are typical? A: Radial vibration, axial thrust position, and speed/phase reference measurements on turbines, compressors, and other fluid‑film bearing machines.
Field Installation Guidelines
- Do not cut or modify the armored probe cable; factory termination preserves calibration.
- Maintain proper bend radius to avoid altering coaxial geometry.
- Route cables away from high‑frequency switching conductors to reduce induced noise.
- Ensure ClickLoc connector is fully seated before energizing the system.
- Confirm installation practices comply with CSA, ATEX, and IECEx hazardous‑area standards.
Have a Question?
