Bently Nevada 330101-00-16-10-11-05 | 3300 XL 8 mm Proximity Transducer System
The Bently Nevada 330101-00-16-10-11-05 is a precision 3300 XL 8 mm proximity probe designed for turbine supervisory instrumentation systems, providing accurate vibration and shaft position measurements.
Part Number Breakdown
330101: 3300 XL 8 mm probe, 3/8‑24 UNF thread, without armor.
00: Unthreaded length option (0.0 inches).
16: Overall case length option (1.6 inches).
10: Total cable length (1.0 m / 3.3 ft).
11: Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable.
Miniature coaxial ClickLoc with protector, FluidLoc cable
Linear Range
2 mm (80 mils)
Operating Temperature
–51 °C to +177 °C (–60 °F to +351 °F)
Approvals
CSA, ATEX, IECEx
Frequently Asked Questions (FAQ)
Q: What is the linear measurement range of this probe? A: The probe provides a 2 mm (80 mils) linear range, spanning from 0.25 mm to 2.3 mm from the probe face.
Q: What hazardous area approvals are included? A: The suffix “05” specifies CSA, ATEX, and IECEx certifications for use in hazardous industrial environments.
Q: How does the FluidLoc cable improve reliability? A: FluidLoc technology prevents oil and fluid migration along the cable, protecting the probe from contamination and ensuring stable long‑term performance.
Q: Can this probe measure both static and dynamic values? A: Yes. It is designed to measure shaft position (static) and vibration (dynamic) parameters simultaneously.
Field Installation Guidelines
Install probe tip perpendicular to shaft surface for accurate displacement readings.
Maintain insertion depth to align with –10 VDC gap reference calibration.
Route FluidLoc cable with shielding grounded at a single point to minimize interference.
Avoid sharp bends in cable to prevent conductor fatigue.
Verify O‑ring seal integrity to maintain pressure resistance.
Confirm driver calibration after installation to ensure proper sensitivity scaling.
