Configured for wide‑range AC input conditioning in MasterLogic power assemblies, the Honeywell 2MLP‑ACF2 (2MLP‑ACF2 power module) provides direct electrical conversion from AC 100–240 V to regulated DC 5 V output for downstream PLC loads.
Hardware Specifications
Parameter
Specification
Model
2MLP-ACF2
Brand
Honeywell
Origin
USA
Weight
Not specified (shipping weight 2 kg)
Dimensions
Not specified
Operating Temp
Not specified
Power Consumption
Not specified
Core Performance Indicators
AC 100–240 V input, DC 5 V at 6 A output, free‑voltage operation (110 V / 220 V), regulated DC conversion
4-20 mA HART Loop Protocol & Channel Isolation Behavior
Although the 2MLP‑ACF2 is a power module rather than a signal module, its regulated DC 5 V output stabilizes backplane conditions for Honeywell process‑control hardware that interfaces with 4‑20 mA HART loop protocol devices. Stable DC supply reduces ripple‑induced drift in analogue input modules and maintains predictable loop update timing. Channel‑to‑channel isolation in downstream I/O modules is preserved when supplied by a stable DC rail, preventing cross‑loop interference under varying load conditions.
Frequently Asked Questions
Q: Can the 2MLP‑ACF2 be hot‑swapped A: No. The module must be inserted or removed only when the system is de‑energized.
Q: Does the module support both 110 V and 220 V AC A: Yes. It is a free‑voltage design supporting AC 100–240 V.
Q: What is the maximum DC output capability A: The module provides DC 5 V at 6 A for backplane and module loads.
Field Installation Guidelines
Mount the module on a stable panel surface and ensure correct AC wiring according to the 100–240 V input specification. Maintain separation between high‑voltage AC conductors and low‑level signal wiring. Verify DC 5 V output before energizing downstream modules. Use proper strain relief and avoid sharp cable bends to maintain connector integrity.
