{"product_id":"yokogawa-anb10d-125-cu2t-centum-vp-esb-bus-node-unit","title":"Yokogawa ANB10D-125\/CU2T CENTUM VP  ESB Bus Node Unit","description":"\u003cp\u003eConfigured for node data communication and I\/O expansion in CENTUM VP control platforms, the \u003cstrong\u003eYokogawa ANB10D-125\/CU2T\u003c\/strong\u003e (\u003cstrong\u003eANB10D-125\/CU2T\u003c\/strong\u003e ESB Bus Node Unit) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANB10D\u003c\/strong\u003e: Base model designation for the ESB Bus Node Unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-1\u003c\/strong\u003e: Indicates the 100-120 V AC power supply input configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-25\u003c\/strong\u003e: Specifies the basic type structural variant without explosion protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\/CU2T\u003c\/strong\u003e: Designates the inclusion of the ESB connector unit with an integrated bus terminator for terminal node placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eANB10D-125\/CU2T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e483 mm x 262 mm x 450 mm (19-Inch Rack Mounting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e230 VA (Apparent) \/ 120 W (Real)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe ANB10D-125\/CU2T processes synchronous ESB bus traffic to maintain deterministic data exchange between Field Control Units and attached I\/O modules. The 4-20 mA HART loop protocol compatibility ensures that analog field measurements and digital diagnostic packets pass concurrently without signal distortion across system networks. Channel-to-channel isolation parameters and ISA Standard G3 corrosive resistance protect internal processing layers from common-mode electrical transients and harsh atmospheric agents. Cold junction compensation (CJC) and internal thermal regulation maintain signal conversion linearity across extreme operating temperatures ranging from -20 deg C to +70 deg C.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What specific bus routing function does the \/CU2T suffix provide?\u003c\/p\u003e\n\u003cp\u003eA: The \/CU2T option incorporates an integrated ESB bus terminator, making it the designated node unit for the terminal end of a bus segment to prevent signal reflection.\u003c\/p\u003e\n\u003cp\u003eQ: Does this node unit support dual-redundant power supplies?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the architecture supports dual-redundant power modules running on 100-120 V AC to ensure continuous operation during individual power source failures.\u003c\/p\u003e\n\u003cp\u003eQ: Can this hardware unit be serviced while the control cabinet backplane is energized?\u003c\/p\u003e\n\u003cp\u003eA: Power supply and communication modules support hot-swap maintenance procedures under strict protocols, but complete node power isolation is recommended when servicing primary backplane links.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the 19-inch rack enclosure securely into the industrial cabinet using M5 screws and ensure low-resistance bonding to the cabinet earth ground.\u003c\/li\u003e\n\u003cli\u003eVerify that the 100-120 V AC power supply source is de-energized prior to connecting input terminal blocks or inserting power modules.\u003c\/li\u003e\n\u003cli\u003eConnect the ESB bus cables securely to the \/CU2T interface, ensuring proper bus topology termination rules are observed at the end of the segment.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum vertical clearance of 50 mm above and below the chassis to allow unimpeded convective airflow through the thermal dissipation profiles.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":48188856402110,"sku":"ANB10D-125\/CU2T","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/1145\/5422\/files\/screenshot_2026-07-10_10-11-23_7780f673-0156-47b7-8920-b44ee3dd0587.png?v=1784798008","url":"https:\/\/www.autooiltech.com\/products\/yokogawa-anb10d-125-cu2t-centum-vp-esb-bus-node-unit","provider":"AutoOilTech Limited","version":"1.0","type":"link"}