{"product_id":"yokogawa-anb10d-125-cu2n-node-unit","title":"Yokogawa ANB10D-125\/CU2N Node Unit","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa ANB10D-125\/CU2N\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eANB10D-125\/CU2N\u003c\/strong\u003e ESB Bus Node Unit, operates as a dedicated hardware component for node expansion and I\/O communication routing within CENTUM VP distributed control architectures.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANB10D\u003c\/strong\u003e: Base model designation for the ESB Bus Node Unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-1\u003c\/strong\u003e: Indicates the 100-120 V AC power supply variant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-25\u003c\/strong\u003e: Specifies the basic type configuration without explosion protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\/CU2N\u003c\/strong\u003e: Designates the inclusion of the non-terminator type ESB Bus connector interface for daisy-chain configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eANB10D-125\/CU2N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e483 mm x 262 mm x 450 mm (19-Inch Rack Mounting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e200 VA (AC) \/ 5.5 A (DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe ANB10D-125\/CU2N manages signal transmission and node interfacing across up to 8 FIO modules while maintaining high-speed ESB bus synchronization. The 4-20 mA HART loop protocol compatibility enables analog sensor measurements and digital communication packets to coexist without signal degradation or cross-talk across control channels. Channel-to-channel isolation parameters and integrated insulation bushes protect internal logic circuits from ground loops and electrical transients originating in the field wiring. Cold junction compensation (CJC) and precise thermal regulation maintain conversion stability across the entire 0 deg C to 50 deg C operational range.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this node unit support dual-redundant power configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the unit is engineered with a dual-redundant power supply architecture supporting 100-120 V AC or 24 V DC inputs to maintain continuous operation during power module failure.\u003c\/p\u003e\n\u003cp\u003eQ: What purpose does the \/CU2N suffix option serve on this node?\u003c\/p\u003e\n\u003cp\u003eA: The \/CU2N option equips the unit with non-terminator type ESB bus connectors intended for daisy-chain topology expansion between nodes.\u003c\/p\u003e\n\u003cp\u003eQ: Can this unit be serviced or replaced while the control cabinet is energized?\u003c\/p\u003e\n\u003cp\u003eA: Power supply and communication modules support hot-swap procedures under specific maintenance protocols, but complete power isolation of the node is recommended when altering backplane connections.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the 19-inch rack chassis securely into the industrial cabinet using M5 screws and ensure proper chassis grounding via the designated earth points.\u003c\/li\u003e\n\u003cli\u003eVerify that supply voltage levels match the 100-120 V AC or 24 V DC input ratings and remain de-energized prior to wiring termination.\u003c\/li\u003e\n\u003cli\u003eConnect the ESB bus cables securely to the \/CU2N connector interfaces, ensuring proper termination at the end of the bus line according to system design rules.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum vertical clearance of 50 mm above and below the chassis housing to allow unrestricted convective airflow through the thermal dissipation vents.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":48188855713982,"sku":"ANB10D-125\/CU2N","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/1145\/5422\/files\/screenshot_2026-07-10_10-11-23_097ef942-959c-459f-a893-9b59511d90a0.png?v=1784797994","url":"https:\/\/www.autooiltech.com\/products\/yokogawa-anb10d-125-cu2n-node-unit","provider":"AutoOilTech Limited","version":"1.0","type":"link"}