{"product_id":"honeywell-620-0088-parallel-link-driver-module","title":"Honeywell 620-0088 Parallel Link Driver Module","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 620-0088\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e620-0088\u003c\/strong\u003e Parallel Link Driver Module, operates as a dedicated hardware component for multi-bit data synchronization within Honeywell 620 series PLC architectures. Configured for addressable parallel communication, the \u003cstrong\u003eHoneywell 620-0088\u003c\/strong\u003e (\u003cstrong\u003e620-0088\u003c\/strong\u003e Parallel Link Driver Module) provides direct physical execution of bus signal buffering, address selection, and parallel data transmission across industrial control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e620-0088\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.63 kg (1.39 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard industrial modular form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eStandard internal module supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCommunication Modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eParallel Link Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2 DIP switches, Key slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control and DCS Metrics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-Channel Isolation:\u003c\/strong\u003e The 620-0088 utilizes internal hardware buffering to decouple the parallel link from the system backplane logic. This architectural separation ensures that electrical transients, signal contention, or faults occurring on the parallel interface do not migrate to the CPU or other rack-mounted I\/O, maintaining the overall deterministic performance of the control loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART Loop Protocol Connectivity (System Context):\u003c\/strong\u003e The module is designed for coexistence within the Honeywell 620 I\/O ecosystem. Its high-speed parallel bus management is shielded from sensitive analog signals to prevent electromagnetic crosstalk, ensuring that high-speed data word transfers do not induce signal noise or jitter in concurrent 4-20 mA HART loop protocol analog measurements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the function of the 2 DIP switches on the module?\u003c\/p\u003e\n\u003cp\u003eA: The DIP switches are utilized for hardware-level addressing or operational mode configuration of the parallel link driver. Refer to the specific Honeywell 620 series system manual to determine the correct switch settings for your particular network topology, as incorrect addressing will result in bus contention and communication failure.\u003c\/p\u003e\n\u003cp\u003eQ: Can the key slot be used for physical security or module locking?\u003c\/p\u003e\n\u003cp\u003eA: The key slot is intended for module polarization and identification within the rack assembly. It ensures that the module is correctly keyed for its slot position to prevent incorrect module insertion, which could cause electrical damage to the backplane.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIP Switch Configuration:\u003c\/strong\u003e Before inserting the module into the rack, configure the 2 DIP switches according to the network plan. Changes made while the module is powered may not be recognized by the processor until a hardware reset or power cycle is performed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding:\u003c\/strong\u003e Given the parallel nature of the data bus, use high-quality shielded cables. Ensure the cable shield is bonded to the cabinet’s instrumentation ground to minimize the risk of bit errors caused by electromagnetic interference from surrounding high-voltage equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Seating:\u003c\/strong\u003e Verify that the key slot aligns correctly with the rack guide pins before applying pressure to seat the module. Forceful insertion without proper key alignment can damage the backplane connector or the module housing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":47908440506558,"sku":"620-0088","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/1145\/5422\/files\/screenshot_2026-07-03_14-59-46.png?v=1783066119","url":"https:\/\/www.autooiltech.com\/products\/honeywell-620-0088-parallel-link-driver-module","provider":"AutoOilTech Limited","version":"1.0","type":"link"}