{"product_id":"ge-ds200ptbag1aec-pc-board-plc","title":"GE DS200PTBAG1AEC PC Board PLC","description":"\u003cp\u003eConfigured for turbine control signal processing in Speedtronic Mark V systems, the \u003cstrong\u003eGeneral Electric DS200PTBAG1AEC\u003c\/strong\u003e (\u003cstrong\u003eDS200PTBAG1AEC\u003c\/strong\u003e PC Board) provides direct physical\/electrical execution. This board facilitates the termination and signal conditioning of turbine-critical sensor inputs, bridging field-level instrumentation to the primary control processors of the Mark V turbine management platform.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDS200PTBAG1AEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.52 kg (1.15 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e229 mm x 178 mm x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 VDC nominal (backplane powered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBoard Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTurbine Control Termination Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMulti-pin terminal block assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network and Control Execution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Bus Communication Velocity\u003c\/strong\u003e: The board interfaces with the Mark V backplane using high-speed bus lines, ensuring deterministic data exchange between field sensors and control processors. Firmware flash compatibility is managed via the board's onboard programmable logic, which must align with the specific Mark V rack software revision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/strong\u003e: While operating as a native Mark V component, the board architecture supports deterministic data packet timing required for integrated turbine control loops, maintaining sub-millisecond signal processing latencies for fuel flow and speed feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O Density Scaling\u003c\/strong\u003e: The card supports high-density sensor terminations, allowing for the consolidation of analog and digital signals from the turbine skids. Board-level jumper configurations allow for specific I\/O density scaling based on the turbine configuration (gas or steam).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the DS200PTBAG1AEC be replaced while the turbine control system is online?\u003c\/p\u003e\n\u003cp\u003eA: No. The DS200PTBAG1AEC is not a hot-swappable module. The Mark V rack power must be fully isolated before removal to prevent backplane signal corruption and potential damage to the board's sensitive terminal circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: What is the significance of the \"AEC\" suffix in the part number?\u003c\/p\u003e\n\u003cp\u003eA: The \"AEC\" suffix denotes the specific hardware revision level of the board. Replacement boards must be verified for compatibility with the specific Mark V software configuration and firmware version currently running in the turbine control rack.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding\u003c\/strong\u003e: Connect all cable shields to the designated common ground bar on the cabinet backplane to prevent ground loop currents. Ensure that shields are terminated at the control end only to avoid noise propagation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Handling\u003c\/strong\u003e: The board is highly sensitive to electrostatic discharge (ESD). Always use a grounded wrist strap and handle the board only by the edges or the provided extraction handles to avoid physical damage to surface-mount components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Terminations\u003c\/strong\u003e: When installing field wiring into the terminal blocks, ensure that each wire is stripped to the correct length (typically 6-8 mm) and torqued to 0.4 N-m. Check that no stray wire strands extend beyond the terminal barriers, as these can cause short circuits between adjacent input channels.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":48167328481470,"sku":"DS200PTBAG1AEC","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/1145\/5422\/files\/screenshot_2026-07-16_09-25-53_4a0f18ef-0876-4648-805c-f8d07d4448c0.png?v=1784281277","url":"https:\/\/www.autooiltech.com\/products\/ge-ds200ptbag1aec-pc-board-plc","provider":"AutoOilTech Limited","version":"1.0","type":"link"}