{"product_id":"fc-psu-uni2424-honeywell-power-supply-unit","title":"FC-PSU-UNI2424 | Honeywell | Power Supply Unit","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell FC-PSU-UNI2424\u003c\/strong\u003e serves as the primary \u003cstrong\u003eFC-PSU-UNI2424\u003c\/strong\u003e Power Supply Unit utilized to execute regulated power distribution across Honeywell Safety Manager platforms. The hardware rectifies and conditions incoming mains voltage to a stabilized 24 VDC output, delivering continuous current to critical safety-instrumented systems, central processing modules, and critical I\/O termination assemblies.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e: FC-PSU-UNI2424\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: Honeywell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin\u003c\/strong\u003e: United States \/ Netherlands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: Standard Safety Manager rack\/panel mount footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temp\u003c\/strong\u003e: -40 to 70 deg C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage\u003c\/strong\u003e: 115 VAC \/ 230 VAC nominal range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e: 24 VDC stabilized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Current\u003c\/strong\u003e: 24 A nominal rating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Natural convection thermal heat sink dissipation profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Loop Performance\u003c\/h3\u003e\n\u003cp\u003eTo preserve complete loop integrity within complex process environments, this unit incorporates robust channel-to-channel isolation architecture across its distribution paths. This infrastructure prevents external electrical faults from propagating back to the main control backplane, mitigating ground loops and stabilizing the 4-20 mA HART loop protocol signaling on adjacent I\/O modules by maintaining strict voltage rail tolerances under dynamic load steps.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this power supply module support parallel redundancy for fault-tolerant configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the unit is equipped with internal decoupling diodes that support direct parallel connection with an identical module, enabling 1+1 or N+1 redundant load sharing with seamless zero-millisecond switching latency upon an individual module failure.\u003c\/p\u003e\n\u003cp\u003eQ: Is there any internal protection against sustained short circuits on the 24 VDC output loop?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the unit utilizes a continuous current-limiting hiccup mode circuit protection configuration. Upon detecting a sustained short circuit or over-current condition, the output voltage drops to protect internal components and resets automatically once the field fault is cleared.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the unit vertically onto standard heavy-duty TS35 DIN rails or dedicated panel backplates. Ensure the integrated ventilation slots are positioned at the top and bottom to facilitate natural convective thermal air currents.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum clear spacing of 80 mm above and below the chassis boundaries to avoid thermal loading and potential output current derating when operating in ambient field environments near 70 deg C.\u003c\/li\u003e\n\u003cli\u003eTerminate incoming AC mains wiring using insulated ring lugs or specified screw clamps. Torque all input and output power terminal links to exactly 1.2 Nm to guarantee low-resistance connections and prevent localized overheating.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":47595874549950,"sku":"FC-PSU-UNI2424","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/1145\/5422\/files\/honeywell-fc-psu-uni2450u-power-supply-unit-0edzb5kz1yf.png?v=1759132556","url":"https:\/\/www.autooiltech.com\/products\/fc-psu-uni2424-honeywell-power-supply-unit","provider":"AutoOilTech Limited","version":"1.0","type":"link"}