{"product_id":"con021-914-100-pr6423-010-010-cn-emerson-epro-eddy-current-sensors","title":"CON021\/914-100+PR6423\/010-010-CN | EMERSON EPRO | Eddy Current Sensors","description":"\u003cp\u003e\u003cstrong\u003eSystem Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis measurement chain is a matched set designed for non-contacting displacement measurement. The\u003cstrong\u003e \u003c\/strong\u003ePR6423 eddy current probe detects shaft movement, and the CON021 converter translates those movements into a linear voltage signal. This specific configuration is calibrated for a 10-meter system length, which is essential for accuracy in large machinery where the converter is mounted in a remote cabinet.\u003c\/p\u003e\n\u003cp\u003eComponent 1: CON021\/914-100 Signal Converter\u003c\/p\u003e\n\u003cp\u003eThe \u003cb data-path-to-node=\"5\" data-index-in-node=\"4\"\u003eCON021\/914-100\u003c\/b\u003e is the driver\/transmitter. The \"100\" suffix specifically identifies its calibration settings, most importantly the total length of the cable it expects to drive.\u003c\/p\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"6,0,0\" data-index-in-node=\"0\"\u003eModel:\u003c\/b\u003e CON021\/914-100\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"0\"\u003eSystem Length:\u003c\/b\u003e Calibrated for\u003cstrong\u003e \u003c\/strong\u003e10 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"6,2,0\" data-index-in-node=\"0\"\u003eOutput Signal:\u003c\/b\u003e Typically converts displacement to a standardized 0 to -20 VDC signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"6,3,0\" data-index-in-node=\"0\"\u003eOscillator Frequency:\u003c\/b\u003e Generates the high-frequency carrier signal for the probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"6,4,0\" data-index-in-node=\"0\"\u003eHousing:\u003c\/b\u003e DIN-rail mountable, aluminum shielded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComponent 2: PR6423\/010-010-CN Displacement Sensor\u003c\/p\u003e\n\u003cp\u003eThe \u003cb data-path-to-node=\"8\" data-index-in-node=\"4\"\u003ePR6423\u003c\/b\u003e is an 8 mm tip eddy current sensor. The nomenclature \"010-010\" defines its physical build and integral cable.\u003c\/p\u003e\n\u003cul data-path-to-node=\"9\"\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"9,0,0\" data-index-in-node=\"0\"\u003eModel:\u003c\/b\u003e PR6423\/010-010-CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"0\"\u003eTip Diameter:\u003c\/b\u003e 8 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"9,2,0\" data-index-in-node=\"0\"\u003eMeasuring Range:\u003c\/b\u003e 2.0 mm (nominal).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"9,3,0\" data-index-in-node=\"0\"\u003eIntegral Cable:\u003c\/b\u003e 1.0 meter (identified by the first \"010\").\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"9,4,0\" data-index-in-node=\"0\"\u003eProtection:\u003c\/b\u003e The second \"010\" often signifies an armored conduit for mechanical protection of the cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"9,5,0\" data-index-in-node=\"0\"\u003e\"CN\" Suffix:\u003c\/b\u003e Indicates compliance with specific regional standards (often GB\/T standards for the Chinese market) or specific connector variations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Performance Characteristics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eSensitivity:\u003c\/b\u003e Typically\u003cstrong\u003e \u003c\/strong\u003e8 V\/mm (200 mV\/mil).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"12,1,0\" data-index-in-node=\"0\"\u003eLinearity Range:\u003c\/b\u003e Provides a highly accurate window of measurement, typically from -2 VDC to -18 VDC of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"12,2,0\" data-index-in-node=\"0\"\u003e10m Matching:\u003c\/b\u003e This converter\u003cstrong\u003e \u003c\/strong\u003emust be used with exactly 10 meters of total cable. Using a 5-meter setup with this \"100\" series converter will result in significant measurement errors and non-linearity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"12,3,0\" data-index-in-node=\"0\"\u003eEnvironmental Durability:\u003c\/b\u003e The sensor is rated for high-pressure environments and is resistant to hot lubricating oils, making it ideal for bearing-pedestal mounting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":46427754102974,"sku":"CON021\/914-100+PR6423\/010-010-CN","price":860.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/1145\/5422\/files\/emerson-pr6423-010-020-cn-con021-epro-eddy-current-sensors-xoxfyrbrnal.png?v=1759051907","url":"https:\/\/www.autooiltech.com\/products\/con021-914-100-pr6423-010-010-cn-emerson-epro-eddy-current-sensors","provider":"AutoOilTech Limited","version":"1.0","type":"link"}